Analab CleanAcids

Sub-boiling Purification Systems

Designed to safely generate ultra-pure reagents required for trace metal analysis from inexpensive reagent-grade starting materials.

Clean Acids. Lower Cost. Better Results.

  • Produce high-purity acid when it is needed - from lower cost reagent grade acid
  • The inexpensive reagent-grade acid is gently heated and the condensed vapors produce high-purity acid in an external collection bottle
  • Units available with 1, 3, 6, & 12 purification stations; equipped with volumes of 125, 500, & 1000 mL
  • All CleanAcid component surfaces are PFA coated to eliminate corrosion by acid vapors, for long. maintenance-free lifetime
  • Temperature Regulator located remote from device with a PFA encapsulated cable to allow placement outside hood environment
CleanAcids 3 x 500 mL
CleanAcids 3 x 500 mL

CleanAcids Models

Save your lab money and time with Analab’s acid purification systems!
CleanAcids 3 x 125 mL
CleanAcids 3 x 125 mL
CleanAcids 12 x 125 mL
CleanAcids 12 x 125 mL
CleanAcids 3 x 500 mL
CleanAcids 3 x 500 mL
CleanAcid 1 x 1000 mL
CleanAcids 1 x 1000 mL

How It Works

  • The inexpensive reagent-grade acid is placed inside a PFA bottle and held by the CleanAcids system to a constant, uniform and controlled temperature (just below the acid boiling point)
  • Sub-boiling distillation produces high-purity acid vapors which then condense into the collection vessel
  • Purification for HCl, HNO3, HBr, HF, HClO4, NH4OH & H202
How It Works

CleanAcids Accessories

  • Vessel Kits available in 125, 500, & 1000 mL sizes
  • All Fluoropolymer construction for corrosion resistance and high purity
  • Each Vessel Kit consists of 2 PFA vessels, 2 PFA caps, and fluoropolymer elbow with vent
  • Elbow Stands available for all vessel sizes, for support of Vessel kits while not in use
500 mL Vessel Kit
500 mL Vessel Kit
Elbow Stand & Vessel Kit
Elbow Stand & Vessel Kit

Temperature Controlled Regulators

  • All Analab devices require an external temperature regulator/controller
  • Designed for remote location outside the corrosive atmosphere of the fume hood for extended operational lifetime
  • Available in 110–120 V & 208-240 V models
  • Single controller models available in:
    • Single-setpoint Nonprogrammable Regulator with Timer
    • Multistep Programmable Regulator
  • Dual controllers available with temperature feedback/control from remote probe
Nonprogrammable Regulator with Timer
Nonprogrammable Regulator with Timer
Programmable Regulator with Timer
Programmable Regulator with Timer
Programmable Dual Controller Regulator
Programmable Dual Controller Regulator

CleanAcids 3 x 125 mL

CleanAcids 3 x 125 mL
Part No.: CA-3.125-2V-20A

Three positions for 125mL vessels to capture the purified reagent.

CleanAcids 6 x 125 mL

CleanAcids 6 x 125 mL
Part No.: CA-6.125-2V-20A

Six positions for 125mL vessels to capture the purified reagent.

CleanAcids 3 x 500 mL

CleanAcids 3 x 500 mL
Part No.: CA-3.500-2V-20A

Three positions for 500mL vessels to capture the purified reagent. 250°C max.

CleanAcids 1 x 1000 mL

CleanAcids 1 x 1000 mL
Part No.: CA-1.1000-1V-15A

One position for 1000mL vessel to capture the purified reagent.

Vessel Kit - 125 mL

Vessel Kit - 125 mL
Part No.: VK-125mL-WV

Vessel kit for 125 mL devices

Vessel Kit - 500 mL

Vessel Kit - 500 mL
Part No.: VK-500mL-WV

Vessel kit for 500 mL devices

Vessel Kit - 1000 mL

Vessel Kit - 1000 mL
Part No.: VK-1000mL-WV

Vessel kit for 1000 mL (1 L) devices

Stand for Elbows - 6 X 125 mL

Stand for Elbows - 6 X 125 mL
Part No.: ES-6.125

Six position stand to hold 125mL vessels in any stage of the process.

Vessels shown sold separately

Stand for Elbows - 3 X 500 mL

Stand for Elbows - 3 X 500 mL
Part No.: ES-3.500

Three position stand to hold 500mL vessels in any stage of the process.

Vessels shown sold separately