Analab Regulators

Remote Temperature Control for Analab Devices

Analab Regulators provide controlled power to Analab devices to precisely control heating, and are designed to operate outside of the corrosive hood environment.

Better Sample Preparation = Better Results

Designed for remote placement outside of corrosive atmosphere of lab hood for long operational lifetime
Provide direct temperature readout from controller display
Single temperature setpoint with timer model for basic heating & digestion requirements
Programmable with multiple setpoints for more advanced heating conditions
Dual controller regulators for combination of heating and external temperature probe readout/control

Non-Programmable Regulator with Timer

Jump To Products

Regulators Features Diagram

Device Support

Analab Regulators provide support for the following Analab devices:

FluoroPlate

FluoroBloc

EvapoClean

CleanAcids

Single Controller Regulators

Choose the regulator to match your Analab Device and available power supply.

Non-Programmable with Timer models provide single temperature setpoint
Programmable model provides multiple, timed temperature setpoints

* Additional plug configurations available upon request

Non-Programmable Regulator with Timer

Programmable Regulator

Dual Controller Regulators

Dual Controller Regulators are when use of an external temperature probe is desired.

Available in both Non-Programmable with Timer and Programmable models
Display temperature and control heating from remote probe
Operate also as single controller unit, with direct feedback from Analab device
Remote temperature probes options available for remote temperature sensing in liquids or vapor phase

Programmable Dual Controller Regulator

Product Flyer

Analab Regulators Flyer

Temperature Regulators - 110V

Part No.: REG-1V

Ultimate protection against unintended start, non-programmed temperature changes, short circuit, and overcurrent fuses. North American version.

Available options:

Non-programmable with timer (#RNP-1V-15A-T (15A)/ RNP-1V-20A-T (20A))
Programmable (#RP-1V-15A (15A)/ RP-1V-20A (20A))

Temperature Regulator - 110V for Insitu Probe

Part No.: RNP-DUAL-1V-15A / RP-DUAL-1V-15A

Temperature regulator with an inclusive design for use with external insitu sensor probe (sold separatly) allowing inside solution temperature measurements. Programmable and non-programmable functions. 110V at both 15/20A. Insitu probe sold separately. North American version.

Temperature Regulator - 208-240V for Insitu Probe

Part No.: RNP-DUAL-2V-20A/ RP-DUAL-2V-20A

Temperature regulator with an inclusive design for use with external insitu sensor probe (sold separatly) allowing inside solution temperature measurements. Programmable and non-programmable functions. 230V at both 15/20A. Insitu probe sold separately. North American version.

External Temperature Insitu Probe

Part No.: PROBES

Protected in a Teflon sheath (150, 270 or 450mm long)

Available options:

#S-INSITU-150E - External temperature Insitu probe 150 mm length for remote sensing in liquids. For use with Analab EvapoClean and CleanAcid Vessel Kits
#S-INSITU-270E - External temperature Insitu probe 270 mm length for remote sensing in liquids. For use with Analab EvapoClean and CleanAcid Vessel Kits
#S-INSITU-450E - External temperature Insitu probe 450 mm length for remote sensing in liquids. For use with Analab EvapoClean and CleanAcid Vessel Kits
#S-INSITU-150L - External temperature Insitu probe 150 mm length for remote sensing in liquids. For use with digestion vessels
#S-INSITU-270L - External temperature Insitu probe 270 mm length for remote sensing in liquids. For use with digestion vessels
#S-INSITU-450L - External temperature Insitu probe 450 mm length for remote sensing in liquids. For use with digestion vessels