Digest the Sample

The Analab product line will help to quickly achieve clean, reproducible sample digestion, eliminate contamination, and maximize reagent purity with our portfolio of innovative and patented equipment for the preparation of your precious samples. Designed for continuous operation in an aggressively chemical environment and are totally inert-to acid solutions and the corrosive atmosphere of fume hoods.

FLUOROPLATE/EASYDIGEST FLYER FLUOROBLOC FLYER REGULATORS FLYER

FluoroPlate Hotplates

The FluoroPlate Hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods and do not emit any particles that could contaminate the samples and your laboratory.

EasyDigest^® Rack Configurations for FluoroPlate

The ultimate flexibility in sample digestion! The ability to add multiple racks to your existing hotplate making it suitable to your desired vessels and quantities making it fully modular, with perfect homogeneity. They are perfect for trace and ultra-trace analysis.

FluoroBloc

FluoroBloc is an inert digestion block dedicated to providing unmatched temperature uniformity and reliability in an aggressive chemical environment. The exceptional temperature homogeneity between sample positions and across the sample container walls is perfect for controlled digestions.

A4-Plate FluoroPlate Package

Part No.: A4P-1V

Analab A4 small (32 x 23cm) inert hotplate with rims equipped with PTFE bench and side thermal protection and programmable regulator, reaches 250°C (+/-2°C). North American version, 110V/15A, NEMA 5-15P cable.

A3-Plate FluoroPlate Package

Part No.: A3P-1V

Analab A3 medium size (42 x 33cm) inert hotplate with rims equipped with PTFE bench and side thermal protection with programmable regulator, reaches 200°C (+/-2°C). North American version, 110V/15A, NEMA 5-15P cable.

A2-Plate FluoroPlate Package

Part No.: A2P-2V

Analab A2 large (62 x 42cm) inert hotplate with rims equipped with PTFE bench and side thermal protection with programmable regulator, reaches 240°C (+/-2°C). North American version, 208-240V/20A, NEMA 6-20P cable.

A4-Plate FluoroPlate

Part No.: A4-1V/A4-2V

Analab A4 small (32 x 22cm) inert hotplate equipped with PTFE bench and side thermal protection. Up to 250° C max temperature can be reached, if desired, with the selection of 110V/15A (Part No.: A4-1V ) or 208-240V/15A (Part No.: A4-2V ) regulator (regulator sold separately).

A3-Plate FluoroPlate

Part No.: A3-1V/A3-2V

Analab A3 medium size (40 x 30cm) inert hotplate equipped with PTFE bench and side thermal protection. Up to 200° C max temperature can be reached, if desired, with the selection of 110V/15A (Part No.: A3-1V) regulator (1V) and 250° C (2V) with the 208-240V/15A (Part No.: A3-2V) regulator (regulator sold separately).

A2-Plate FluoroPlate

Part No.: A2-1V/A2-2V

The Analab A2 (60 x 40cm) hotplate is the largest on the market with a max temperature of 240° C with a 208-240V/20A (Part No.: A2-2V) regulator or a max temperature of 165° C with the 110V/20A (Part No.: A2-1V) regulator (regulator sold separately).

High Temperature Hotplates 350° C

Part No.: PL-350

Analab has developed a hotplate that can reach 350°C by offering a graphite body without a coating. 230V regulator is required to reach this temperature (regulator sold separately).

Available options:

A4 (#PL-A4-2V-350): 320 x 220 x 50 mm. Overall: 410 x 310 x H160 mm
A3 (#PL-A3-2V-350): 420 x 320 x 50 mm. Overall: 530 x 430 x H170 mm
A2 (#PL-A2-2V-350): 620 x 420 x 50 mm. Overall: 720 x 520 x H170 mm

Temperature Regulators - 110V

Part No.: REG-1V

Ultimate protection against unintended start, non-programmed temperature changes, short circuit, and overcurrent fuses. North American version. (Programmable pictured)

Available options:

Non-programmable with timer (#RNP-1V-15A-T (15A)/ RNP-1V-20A-T (20A))
Programmable (#RP-1V-15A (15A)/ RP-1V-20A (20A))

Temperature Regulators - 208-240V

Part No.: REG-2V

Ultimate protection against unintended start, non-programmed temperature changes, short circuit, and overcurrent fuses. North American version. (Non-programmable pictured)

Available options:

Non-programmable with timer (#RNP-2V-15A-T(15A)/RNP-2V-20A-T (20A))
Programmable (#RP-2V-15A (15A)/RP-2V-20A (20A))

Temperature Regulator - 110V for Insitu Probe

Part No.: RNP-DUAL-1V-15A / RP-RP-DUAL-1V-15A

Temperature regulator with an inclusive design for use with external insitu sensor probe (sold separatly) allowing inside solution temperature measurements. Programmable and non-programmable functions. 110V at both 15/20A. Insitu probe sold separately. North American version.

Temperature Regulator - 208-240V for Insitu Probe

Part No.: RNP-DUAL-2V-20A/ RP-DUAL-2V-20A

Temperature regulator with an inclusive design for use with external insitu sensor probe (sold separatly) allowing inside solution temperature measurements. Programmable and non-programmable functions. 230V at both 15/20A. Insitu probe sold separately. North American version.

External Temperature Insitu Probe

Part No.: PROBES

Protected in a Teflon sheath (150, 270 or 450mm long)

Available options:

#S-INSITU-150E - External temperature Insitu probe 150 mm length for remote sensing in liquids. For use with Analab EvapoClean and CleanAcid Vessel Kits
#S-INSITU-270E - External temperature Insitu probe 270 mm length for remote sensing in liquids. For use with Analab EvapoClean and CleanAcid Vessel Kits
#S-INSITU-450E - External temperature Insitu probe 450 mm length for remote sensing in liquids. For use with Analab EvapoClean and CleanAcid Vessel Kits
#S-INSITU-150L - External temperature Insitu probe 150 mm length for remote sensing in liquids. For use with digestion vessels
#S-INSITU-270L - External temperature Insitu probe 270 mm length for remote sensing in liquids. For use with digestion vessels
#S-INSITU-450L - External temperature Insitu probe 450 mm length for remote sensing in liquids. For use with digestion vessels

FluoroBloc 24 Position Package - 50 mL

Part No.: FBP-24-1V-50 / FBP-24-2V-50

FluoroBloc 24 position (50 mL vessels) with 208-240V non-programmable regulator with timer. Equipped with PTFE bench and side thermal protection. North American version.

FluoroBloc 48 Position Package - 50 mL

Part No.: FBP-48-1V-50 / FBP-48-2V-50

FluoroBloc 48 position (for 50 mL vessels) with 208-240V non-programmable regulator with timer. Equipped with PTFE bench and side thermal protection. North American version.

FluoroBloc 48 Position Package - 30 mL

Part No.: FBP-48-1V-30

FluoroBloc 48 position (for 30 mL vessels) with 110V non-programmable regulator with timer. Equipped with PTFE bench and side thermal protection. North American version. NEMA 5-15P cable

FluoroBloc 24 Positions

Part No.: FB-24-2V-Series

FluoroBloc 24 position (30 mL or 50 mL vessels) 208-240V non-programmable regulator with timer sold separately. Equipped with PTFE bench and side thermal protection. North American version.

Available options:

30 mL Vessel (Part No.: FB-24-2V-30)
50 mL Vessel (Part No.: FB-24-2V-50)

FluoroBloc 48 Positions

Part No.: FB-48-2V-Series

FluoroBloc 48 position (30 mL or 50 mL vessels) 208-240V non-programmable regulator with timer sold separately. Equipped with PTFE bench and side thermal protection

Available options: