Condition the Vessel


Analab offers unrivaled devices that will decontaminate and condition a wide variety of containers and pipette tips all at once by acid steam condensation. This contained, hot decontamination procedure, uses an extremely pure acidic vapor condensate. Since the units are completely contained during the cleaning process, there are no contaminant introduced to the containers. These devices and decontamination procedures are perfectly adapted to the requirements of trace and ultra-trace analysis.
Offers lower blanks – Saves time – Reduces acid and consumables costs.

View how CleanClever works View how EasyTrace works View EasyTrace Options



This clever device allows individual washing of containers of various shapes and sizes. The containers to be cleaned are installed as condensers for very pure steam from the evaporation of standard quality acid. Can be used with our FluoroPlate, FluoroBloc, or our Evapoclean.


Decontamination and conditioning by acid steam condensation capable of handling multiple vessel sizes at once: Digestion tubes, auto sampler vials, microwave liners, storage or sampling bottles, pipette tips, or UV cups. It is ideal for laboratories performing trace and ultra-trace analyses.

P'Tips Cleaner

Cold P’Tips cleaner satisfies all criteria for analysing trace elements. The tips are decontaminated in conditions similar to those of their use: same batch of reagent, same temperature. Cold P’Tips cleaner makes handling very safe and decreases operating cost as they can be can be used many times.



Part No.: ET-Series

EasyTrace for future use of the Clean Rinse Dry (CRD) System.

Available options:

  • Lg – 110V/15A (#ET-L-1V)
  • XL – 110V/15A (#ET-XL-1V)
  • Lg – 208-240V/20A (#ET-L-2V)
  • XL – 208-240V/20A (#ET-XL-2V)

EasyTrace with Clean Rinse Dry (CRD) System

Part No.: ET-CRD-Series

EasyTrace with Clean Rinse Dry System (CRD) is completely self-contained so the operator is not in contact with the reagent.

Available options:

  • Lg – 110V/15A (#ET-L-CRD-1V)
  • XL – 110V/15A (#ET-XL-CRD-1V)
  • Lg – 208-240V/20A (#ET-XL-CRD-1V)
  • XL – 208-240V/20A (#ET-XL-CRD-2V)

EasyTrace Option 1

Part No.: OPTION-1

The interior of the EasyTrace already is supplied with one PTFE base plate and a handling rod. By adding additional plate(s), the unit can potentially double your cleaning capacity.

Available options:

  • PTFE middle plate for medium unit (#OPTION-1-M)
  • PTFE middle plate for large unit (#OPTION-1-L)
  • PTFE middle plate for XL unit (#OPTION-1-XL)

EasyTrace Option 2

Part No.: OPTION-2

Adding an additional PTFE base plate, handling rod, and convenient 120mm tall rods (qty 48) allow you to prepare a second set of vessels to be washed in advance.

Available options:

  • Middle plate, handle, 48 rods (med) (#OPTION-2-M)
  • Middle plate, handle, 48 rods (lg) (#OPTION-2-L)
  • Middle plate, handle, 48 rods (xl) (#OPTION-2-XL)

EasyTrace Option 3

Part No.: OPTION-3

Convenient rods (qty 48) in PTFE allow you to stabilize your vessels on the plate.

Available options:

  • Additional rods – 120 mm height (#OPTION-3-120)
  • Additional rods – 160 mm height (#OPTION-3-160)
  • Additional rods – 210 mm height (#OPTION-3-210)

EasyTrace Option 4

Part No.: OPTION-4

Pipette tips racks allows you to easily and efficiently clean multiple sizes inside the EasyTrace unit.

Available options:

  • Pipette tips rack to hold 200 uL (#OPTION-4-200)
  • Pipette tips rack to hold 1000 uL (#OPTION-4-1000)
  • Pipette tips rack to hold 5000 uL (#OPTION-4-5000)
  • Pipette tips rack to hold 10000 uL (#OPTION-4-10000)

EasyTrace Option 5

Part No.: OPTION-5

Small OD vessel holder can be used to stabilize your vessel(s) instead of the rods, quantity 1. Universal fit for M, L, and XL units.