#'s | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All |
Analab® offers equipment for washing, decontaminating and conditioning a wide variety of containers to be used for mineralising, transferring and storing samples in their liquid state. Washing with hot steam or at room temperature. Purification devices for obtaining the purest reagents, essential for the successful results of your analyses. Effective mineralization, with no risk of overheating or contaminating your samples owing to the equipment. Device for the evaporation of samples in a closed environment.
Three cone set for PerkinElmer NexION series
Set includes 1 each of the following: Nickel Sampler Cone (MC-33612), Nickel Skimmer Cone (MC-26356) and an Aluminum Hyper Skimmer (MC-33995)
Not valid with any other discounts
Offer ends 04/30/2021
Fit Kit F5 for Standard Bore Meinhard nebulizer, standard integrated capillary. 70cm capillary.
Compatible with only Standard Bore Nebulizers.
Select a internal diameter below.
Two cone set for PerkinElmer NexION series
Set includes 1 each of the following: Nickel Sampler Cone (MC-33612) and Nickel Skimmer Cone (MC-26356)
Not valid with any other discounts
Offer ends 04/30/2021
ETP Electron Multiplier Detector for Agilent 7700 Only. Will not work with the Agilent 8800
Ni sampler Cone, Ni base for PerkinElmer NexION series
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $265.00 each |
Purchase 3+: | $248.00 each |
Discounts will be applied in the Shopping Cart
Ni Skimmer Cone for PerkinElmer NexION series
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $260.00 each |
Purchase 3+: | $245.00 each |
Discounts will be applied in the Shopping Cart
Al hyper skimmer cone, Al base for PerkinElmer NexION series
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $142.00 each |
Purchase 3+: | $140.00 each |
Discounts will be applied in the Shopping Cart
Using this equipment, vessels of different shapes can be washed individually. The vessels to be washed are installed as condensers of very pure steam generated from the evaporation of standard quality acid.
CleanAcids allows mineral acid solutions (HCl, HNO3, HF, HBr, HClO4) and organic solvents with very pure elements, of the ppt type, to be prepared from reagents of technical quality or for analysis.
COMPOSITION OF A COLD P'TIPS CLEANER:
PVC support, PTFE tank and cover, 1 P'Tips Cleaning Holder (support for pipette tips), 1 1L bottle in PFA.
This system allows for the automatic introduction and removal of washing and rinsing reagents, then management of the drying and cooling phases.
COMPOSITION OF AN ETC EVO II:
A tank and a lid inert to acids, an integrated heating device, a plate for containers.
Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
PFA Gas Quick Connect for Meinhard Nebulizer w/ maria for both small bore and standard bore nebulizers.
Our hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a Fluoropolymer sheath). They do not emit any particles that could contaminate the samples and laboratory, and they can be installed in dust-free laboratories and clean rooms. The safe controllers (3 safety fuses in total) allow it to be used intensively.
Invoil 702 Diffusion Pump Fluid is a general-purpose fluid designed for fast pumping of large volumes of gas. It is used to produce vacuums in the range of 10-5 to 10-7 torr. It is also used in vapor ejector pumps that attain vacuums of 10-4 to 10-5 torr. 1 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni Jet sampler cone for Finnigan Neptune
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $475.00 each |
Purchase 3+: | $425.00 each |
Discounts will be applied in the Shopping Cart
Ni plated sampling cone, Cu base for Agilent 7700x/e and 7700s
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $583.00 each |
Purchase 3+: | $525.00 each |
Discounts will be applied in the Shopping Cart
Ni sampler cone for IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $540.00 each |
Purchase 3+: | $490.00 each |
Discounts will be applied in the Shopping Cart
Ni sampler cone (with fixing holes) for VG ExCell, VG PQ, VG PQ2, VG PQ3 VG Axiom, VG Xi and VG all X.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $250.00 each |
Purchase 3+: | $225.00 each |
Discounts will be applied in the Shopping Cart
Ni skimmer Cone, Ni base (Original) for Plasma Original Design (45/30)
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $295.00 each |
Purchase 3+: | $270.00 each |
Discounts will be applied in the Shopping Cart
Temperature controller:
Designed to reliably and safely control ANALAB devices.
We have selected 2 temperature controller brands, Fuji and Eurotherm and either of these brands can be fitted to our devices.
Agilent 7700/8800 One Piece Torch
Please select size of injector needed below. The correct part number based off of your selection will be displayed in the shopping cart.
PFA Inert Sapphire Kit for Agilent 4500 ICPMS, includes:
(1) 35mm low condensation PFA spray chamber (10mm PFA tube exit)
(1) PFA Purecap end cap
(1) O-ring-free 1.8mm sapphire injector
(1) O-ring-free quartz torch
(2) PFA-100 nebulizer
Quartz Torch for Agilent 7x0 (Varian), ICP AX, w/Right Angle End
(PLEASE NOTE: ML180016 has been replaced with ML180017)
110-120 V, includes cover, timer, heater and sweep. Drain is NOT included with 1.75 & 2.75 Liter.
Please select Liter/Dimension size below.
Torch Holder for Thermo iCAP Q
Please call for pricing and availability information.
Al sampler cone for IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $540.00 each |
Purchase 3+: | $490.00 each |
Discounts will be applied in the Shopping Cart
CleanAcids allows mineral acid solutions (HCl, HNO3, HF, HBr, HClO4) and organic solvents with very pure elements, of the ppt type, to be prepared from reagents of technical quality or for analysis.
COMPOSITION OF A COLD P'TIPS CLEANER:
PVC support, PTFE tank and cover, 1 P'Tips Cleaning Holder (support for pipette tips), 1 1L bottle in PFA.
COMPOSITION OF AN ETC EVO II:
A tank and a lid inert to acids, an integrated heating device, a plate for containers.
Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
Our hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a Fluoropolymer sheath). They do not emit any particles that could contaminate the samples and laboratory, and they can be installed in dust-free laboratories and clean rooms. The safe controllers (3 safety fuses in total) allow it to be used intensively.
Invoil 702 Diffusion Pump Fluid is a general-purpose fluid designed for fast pumping of large volumes of gas. It is used to produce vacuums in the range of 10-5 to 10-7 torr. It is also used in vapor ejector pumps that attain vacuums of 10-4 to 10-5 torr. 5 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni sampler Cone, Ni base for PerkinElmer Elan 5000
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $250.00 each |
Purchase 3+: | $230.00 each |
Discounts will be applied in the Shopping Cart
Ni Sampler Cone, Ni base (Version A) for Plasma Original Design. Works with Version A and Original
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $216.00 each |
Purchase 3+: | $200.00 each |
Discounts will be applied in the Shopping Cart
Ni sampler cone (without fixing holes) for VG ExCell, VG PQ, VG PQ2, VG PQ3 VG Axiom, VG Xi and VG all X.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $250.00 each |
Purchase 3+: | $225.00 each |
Discounts will be applied in the Shopping Cart
Ni sampling cone , Ni base for Agilent T-Mode
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $450.00 each |
Purchase 3+: | $405.00 each |
Discounts will be applied in the Shopping Cart
Temperature controller:
Designed to reliably and safely control ANALAB devices.
We have selected 2 temperature controller brands, Fuji and Eurotherm and either of these brands can be fitted to our devices.
Quartz Torch for Thermo, Element, with 1.0mm, 1.5mm or 2.0mm injector
Please select injector size below.
PFA Inert Sapphire Kit for Agilent 7500 ICPMS, includes:
(1) 35mm low condensation PFA spray chamber (10mm PFA tube exit)
(1) PFA Connector, connects ESI PFA spray chamber to ESI injector
(1) PFA Purecap end cap
(1) O-ring-free 1.8mm sapphire injector
(1) O-ring-free quartz torch
Your choice of (2) nebulizers.
Please select nebulizers below.
CleanAcids allows mineral acid solutions (HCl, HNO3, HF, HBr, HClO4) and organic solvents with very pure elements, of the ppt type, to be prepared from reagents of technical quality or for analysis.
Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
Our hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a Fluoropolymer sheath). They do not emit any particles that could contaminate the samples and laboratory, and they can be installed in dust-free laboratories and clean rooms. The safe controllers (3 safety fuses in total) allow it to be used intensively.
Invoil 704 Diffusion Pump Fluid is a single-component fluid for high vacuums of 10-6 to 10-8 torr (untrapped) and 10-10 to 10-11 torr (trapped). It performs well in tough, rugged applications and offers quick pumpdown, even after exposure to air at operating temperatures. 1 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni sampler Cone, Ni base for PerkinElmer Elan 6000, Elan 3100, Elan 9000, Elan DRC-e, Elan DRC II & Elan DRC Plus
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $223.00 each |
Purchase 3+: | $200.00 each |
Discounts will be applied in the Shopping Cart
Ni sampler cone, Nicone TM, Cu base for iCAPQ and VG ExCell.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $300.00 each |
Purchase 3+: | $275.00 each |
Discounts will be applied in the Shopping Cart
Ni sampler cone, Cu base for IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $540.00 each |
Purchase 3+: | $490.00 each |
Discounts will be applied in the Shopping Cart
Ni sampling cone, Cu base for Agilent 7700 x/e and 7700s
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $453.00 each |
Purchase 3+: | $408.00 each |
Discounts will be applied in the Shopping Cart
Ni Skimmer Cone, Ni base (Version A) for Plasma Wide Angle- WA6, Version A (30-60/45)
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $295.00 each |
Purchase 3+: | $270.00 each |
Discounts will be applied in the Shopping Cart
PFA Inert Sapphire Kit for Agilent 7700 ICPMS, includes:
(1) 35mm Low condensation PFA Spray Chamber
(1) PFA Connector, connects ESI PFA spray chamber to ESI injector
(1) PFA Purecap End Cap
(1) O-Ring-Free Quartz Torch
(2) Agilent version PFA nebulizer, 150-200 µL/min
Your choice of 1.8mm or 2.5mm sapphire injector.
Please select sapphire injector below.
16 mm o.d. vial with screw cap, 15 mL Volume
Please select quantity below.
16 mm o.d. polystyrene tube with screw cap, 15 mL Volume
Please select quantity below.
Temperature controller:
Designed to reliably and safely control ANALAB devices.
We have selected 2 temperature controller brands, Fuji and Eurotherm and either of these brands can be fitted to our devices.
Quartz Injector with O-ring Ball Joint.
Please select injector below.
PFA sample connector for Small Bore Meinhard nebulizer, standard integrated capillary. Small bore capillary connected with 70cm capillary.
Compatible with SilQ+, TQ+, TR+ Meinhard Nebulizers.
Select a internal diameter below.
PFA-Sapphire Inert Introduction Upgrade Kit for Bruker ICPMS includes:
(1) PFA Microflow Nebulizer
(1) 35 mm PFA Spray Chamber
(1) PFA PureCap Endcap with additional gas port
(1) 1.8mm Sapphire Injector
(1) Platinum Shield
(1) Quartz Torch
PFA-Platinum Inert Introduction Upgrade Kit for Bruker ICPMS includes:
(2) PFA Microflow Nebulizer
(1) 35 mm PFA Spray Chamber
(1) PFA PureCap Endcap with additional gas port
(1) 2.0mm Platinum Injector
(1) Platinum Shield
(1) Quartz Torch
100% Nickel sampler cone for Finnigan Element I, Finnigan Element II and Finnigan Neptune.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $275.00 each |
Purchase 3+: | $250.00 each |
Discounts will be applied in the Shopping Cart
CleanAcids allows mineral acid solutions (HCl, HNO3, HF, HBr, HClO4) and organic solvents with very pure elements, of the ppt type, to be prepared from reagents of technical quality or for analysis.
Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
Our hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a Fluoropolymer sheath). They do not emit any particles that could contaminate the samples and laboratory, and they can be installed in dust-free laboratories and clean rooms. The safe controllers (3 safety fuses in total) allow it to be used intensively.
Invoil 704 Diffusion Pump Fluid is a single-component fluid for high vacuums of 10-6 to 10-8 torr (untrapped) and 10-10 to 10-11 torr (trapped). It performs well in tough, rugged applications and offers quick pumpdown, even after exposure to air at operating temperatures. 5 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni Sampler Cone, Ni base (Version B) for Plasma 0.9mm orifice, Version B
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $322.00 each |
Purchase 3+: | $290.00 each |
Discounts will be applied in the Shopping Cart
Ni sampler cone, enhanced low-mass performance for IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $540.00 each |
Purchase 3+: | $490.00 each |
Discounts will be applied in the Shopping Cart
Ni sampling cone, Cu base for Agilent 4500 and 7500
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $450.00 each |
Purchase 3+: | $405.00 each |
Discounts will be applied in the Shopping Cart
Temperature controller:
Designed to reliably and safely control ANALAB devices.
We have selected 2 temperature controller brands, Fuji and Eurotherm and either of these brands can be fitted to our devices.
20 mm o.d. vial with screw cap, 20 mL Volume
Please select quantity below.
100% Al sampler cone for Finnigan Element I, Finnigan Element II and Finnigan Neptune.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $250.00 each |
Purchase 3+: | $225.00 each |
Discounts will be applied in the Shopping Cart
Al sampler cone, enhanced low-mass performance for IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $540.00 each |
Purchase 3+: | $490.00 each |
Discounts will be applied in the Shopping Cart
CleanAcids allows mineral acid solutions (HCl, HNO3, HF, HBr, HClO4) and organic solvents with very pure elements, of the ppt type, to be prepared from reagents of technical quality or for analysis.
Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
Our hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a sheath). They do not emit any particles that could contaminate the samples and laboratory, and they can be installed in dust-free laboratories and clean rooms. The safe controllers (3 safety fuses in total) allow it to be used intensively.
Invoil 705 Diffusion Pump Fluid is a colorless to straw-colored, singlecomponent fluid designed for ultrahigh vacuum applications in the range of 10-9 to 10-10 torr (untrapped) and 10-11 torr (trapped). The vapor pressure and backstreaming rate of Invoil 705 Diffusion Pump Fluid are so low that use of traps or refrigeration is unnecessary for some ultrahigh and ultraclean vacuum applications. It has the highest phenyl content of all silicone diffusion pump fluids and the best resistance to radiation. High spontaneous ignition temperature makes this fluid ideal for use in humanrated space simulation chambers. 1 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni Skimmer Cone, Ni base (Version B) for Plasma Version B, AB6 (30-60/45)
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $295.00 each |
Purchase 3+: | $270.00 each |
Discounts will be applied in the Shopping Cart
25 mm o.d. vial with screw cap, 25 mL Volume
Please select quantity below.
Temperature controller:
Designed to reliably and safely control ANALAB devices.
We have selected 2 temperature controller brands, Fuji and Eurotherm and either of these brands can be fitted to our devices.
Al sampler cone for Platform
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $480.00 each |
Purchase 3+: | $440.00 each |
Discounts will be applied in the Shopping Cart
CleanAcids allows mineral acid solutions (HCl, HNO3, HF, HBr, HClO4) and organic solvents with very pure elements, of the ppt type, to be prepared from reagents of technical quality or for analysis.
Evapoclean allows acid or organic solutions to be evaporated, concentrated and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. The maximum evaporation temperature, 250°C, allows the evaporation of acid solutions (HCl, HNO3, HF, HBr, HClO4) and a high number of organic solvents.
Evapoclean minimizes the emission of corrosive or toxic fumes into the air flow of the fume hoods. The decontamination of the air extracted from the laboratory to satisfy the standards for discharge is thus considerably reduced.
Our hotplates are designed for continuous operation in an aggressively chemical environment. They are totally inert-to acid solutions and the corrosive atmosphere of fume hoods (PFA coating, no metal component exposed to the atmosphere, controller unit can be removed from hood, power cord inserted in a Fluoropolymer sheath). They do not emit any particles that could contaminate the samples and laboratory, and they can be installed in dust-free laboratories and clean rooms. The safe controllers (3 safety fuses in total) allow it to be used intensively.
Synthetic oil (perfluoropolyether PFPE, free of Additivs). Chemically inert. Highest thermal stability for NexION.
1 Liter (Replaced GV80)
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni Sampler Cone (HPI) Supercone for VG ExcCell and VG Xi.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $450.00 each |
Purchase 3+: | $400.00 each |
Discounts will be applied in the Shopping Cart
28 mm o.d. vial with screw cap, 50 mL Volume
Please select quantity below.
Non-flammable, low vapor pressure chemically inert mechanical pump oil. Good radiation stability and resists attack by corrosive gases. High dielectric strength with extended service life. Safe for oxygen service 1 kg
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
PFA-Sapphire Upgrade Kit for PE Optima 2000/4000/5000/7000 DV includes:
(1) PFA PureCap Endcap
(1) PFA Spray Chamber
(1) 1.8 mm i.d. Sapphire Injector
Your choice of (2) nebulizers.
(High Solids Nebulizers also includes PFA elbow for Optima 2000/4000)
Please select nebulizers below.
Pt sampler cone, copper base for Platform
Please call for quote
Inland® 19 Rough Pump Oil is ideal for use in all models of vacuum pumps including Alcatel, Edwards, and Welch. Inland 19 utilizes crude stocks known for their durability and fine lubricating qualities. Precision distillation further enhances these characteristics while providing a cleaner, cooler running, longer-lasting oil that in many instances will provide improved pumping cycles. 1 Liter
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
PFA-Sapphire Upgrade Kit for PerkinElmer ELAN ICPMS includes:
(2) PFA-100 Nebulizers
(1) PFA PureCap Endcap w/ additional gas port
(1) 47 mm PFA Spray Chamber
(1) 1.8 mm Sapphire Injector
Your choice of bayonet or cassette torch.
Please select torch below.
Inland® 45 Mechanical Pump Oil permits strain-free cold starts as a result of its low pour point and high viscosity index (its viscosity is lower than that of typical vacuum pump oils at low temperatures). In addition, because it maintains its viscosity at high temperatures, it provides a good seal under full load conditions. Among other properties offered by Inland 45's unique molecular structure are chemical inertness and high-temperature stability superior to those of other high-performance oils, such as white oils; and low vapor pressure (10-7 torr at 25 deg. C). This oil is recommended for use on all H.P. Mass Spectrometers as well as other systems where the best vacuum levels and lowest Mass Spectrometer background are required. 1 Quart
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni Skimmer Cone for Platform and IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $390.00 each |
Purchase 3+: | $360.00 each |
Discounts will be applied in the Shopping Cart
PFA-Platinum Upgrade Kit for PerkinElmer ELAN ICPMS includes:
(2) PFA-100 Nebulizers
(1) PFA PureCap Endcap w/ additional gas port
(1) 47 mm PFA Spray Chamber
(1) 2.0 mm Platinum Injector
Your choice of bayonet or cassette torch.
Please select torch below.
Inland® 45 Mechanical Pump Oil permits strain-free cold starts as a result of its low pour point and high viscosity index (its viscosity is lower than that of typical vacuum pump oils at low temperatures). In addition, because it maintains its viscosity at high temperatures, it provides a good seal under full load conditions. Among other properties offered by Inland 45's unique molecular structure are chemical inertness and high-temperature stability superior to those of other high-performance oils, such as white oils; and low vapor pressure (10-7 torr at 25 deg. C). This oil is recommended for use on all H.P. Mass Spectrometers as well as other systems where the best vacuum levels and lowest Mass Spectrometer background are required. 1 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Al Skimmer Cone for Platform and IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $390.00 each |
Purchase 3+: | $360.00 each |
Discounts will be applied in the Shopping Cart
To use the DIHEN, an adapter is required so that the DIHEN can replace the injector and injector support adapter in a typical demountable torch. These adapters are available for most ICPMS instruments, as well as for many ICP instruments.
Adapter for DIHEN Nebulizer for Agilent 4500, 7x00, 8x00
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
NEOVAC SY is a high quality, low cost synthetic organic compound (alkyldiphenylether) that performs as well as DC-704. With its low vapor pressure, it will achieve base pressures in the low 10-8 torr range untrapped and will not produce inorganic deposits which can cause electrostatic charge buildup on electrodes of sensitive instruments. 1 Gallon
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
PFA-Sapphire Upgrade Kit for PerkinElmer NexION ICPMS includes:
(1) PFA-ST Nebulizer
(1) 47mm PFA Spray Chamber
(1) PFA PureCap Endcap with additional gas port
(1) 1.8mm Sapphire Injector
(1) Platinum Shield Disc
(1) Quartz Torch
Side Thermal Protection: Polycarbonate or stainless steel frame coated with PFA or PTFE (the most commonly used) which considerably reduces radiation from the side.
We have developed a hot plate that can reach 350°C, especially for mineralization operations at temperatures above 250°C, for the evaporation of H2SO4 solutions. The frame of this plate is inert to acids and constitutes a thermal insulation for protecting the surface of the bench. 350°C hot plate installed in an acid attack-resistant fume hood and bench made of 100% Polypropylene.
To use the DIHEN, an adapter is required so that the DIHEN can replace the injector and injector support adapter in a typical demountable torch. These adapters are available for most ICPMS instruments, as well as for many ICP instruments.
Adapter for DIHEN Nebulizer for Elan 6000, DRC, DRC II, NexION
Ni Skimmer Cone, enhanced low-mass performance for Platform and IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $450.00 each |
Purchase 3+: | $410.00 each |
Discounts will be applied in the Shopping Cart
PFA-Platinum Upgrade Kit for Semicon applications for PerkinElmer NexION ICPMS includes:
(2) PFA-100 Nebulizers
(1) 47mm PFA Spray Chamber
(1) PFA PureCap Endcap with additional gas port
(1) 2.0mm Platinum Injector
(1) Platinum Shield Disc
(1) Quartz Torch
We have developed a hot plate that can reach 350°C, especially for mineralization operations at temperatures above 250°C, for the evaporation of H2SO4 solutions. The frame of this plate is inert to acids and constitutes a thermal insulation for protecting the surface of the bench. 350°C hot plate installed in an acid attack-resistant fume hood and bench made of 100% Polypropylene.
Al Skimmer Cone, enhanced low-mass performance for Platform and IsoProbe
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $450.00 each |
Purchase 3+: | $410.00 each |
Discounts will be applied in the Shopping Cart
To use the DIHEN, an adapter is required so that the DIHEN can replace the injector and injector support adapter in a typical demountable torch. These adapters are available for most ICPMS instruments, as well as for many ICP instruments.
Adapter for DIHEN Nebulizer for Element, Element II, Neptune
O-Ring Free PFA-Sapphire Acid Resistant Inlet Upgrade Kit for Thermo ELEMENT/XR/Neptune includes:
(1) PFA-ST Nebulizer
(1) 47 mm PFA Spray Chamber
(1) PFA PureCap Endcap
(1) 1.8 mm i.d. O-ring Free Sapphire Injector
(1) Precision-bore Quartz Torch for O-ring-free Injector
Santovac 5 Diffusion Pump Fluid is a polyphenyl ether developed from fluids originally produced as lubricants for space vehicles. It has exceptionally low vapor pressure, exceptional thermal stability and a tendency to wet surfaces less readily and "creep" to a lesser extent than is common with most fluids. The fluid is employed for the cleanest high vacuum and ultra high vacuum applications down to less than 10-9 mbar (for example, electron microscopes, mass spectrometers and surface physics studies) where its excellent high vacuum performance and low tendency to migrate into the pump system particularly recommend it. The fluid is chemically stable, non-corrosive, safe and non-toxic at normal operating temperatures. Fluid breakdown products (due to bombardment and so forth) tend to be electrically conducting. Lubricating qualities are good and the fluid finds application to lubricate mechanisms in vacuum systems. 65cc
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
To use the DIHEN, an adapter is required so that the DIHEN can replace the injector and injector support adapter in a typical demountable torch. These adapters are available for most ICPMS instruments, as well as for many ICP instruments.
Adapter for DIHEN Nebulizer for Optima 4x00, 5x00, 7x00, 8x00
DISCONTINUED
Recommended alternatives are F5-50, F5-50-010-84, F5-50-026-ZZ
Union, ferrules, and 5' of 1/16" " o.d. ETFE sample tubing for standard (4 mm o.d.) liquid input nebulizers
O-ring-free PFA-Platinum Upgrade Kit for Thermo ELEMENT includes:
(2) PFA-100 Nebulizers
(1) 47 mm PFA Spray Chamber
(1) PFA PureCap Endcap
(1) 1.8 mm i.d. O-ring Free Sapphire Injector
(1) Precision-bore Quartz Torch for O-ring-free Injector
Pt Skimmer Cone for Platform and IsoProbe
Please call for quote
Santovac 5 Diffusion Pump Fluid is a polyphenyl ether developed from fluids originally produced as lubricants for space vehicles. It has exceptionally low vapor pressure, exceptional thermal stability and a tendency to wet surfaces less readily and "creep" to a lesser extent than is common with most fluids. The fluid is employed for the cleanest high vacuum and ultra high vacuum applications down to less than 10-9 mbar (for example, electron microscopes, mass spectrometers and surface physics studies) where its excellent high vacuum performance and low tendency to migrate into the pump system particularly recommend it. The fluid is chemically stable, non-corrosive, safe and non-toxic at normal operating temperatures. Fluid breakdown products (due to bombardment and so forth) tend to be electrically conducting. Lubricating qualities are good and the fluid finds application to lubricate mechanisms in vacuum systems. 500cc
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
We have developed a hot plate that can reach 350°C, especially for mineralization operations at temperatures above 250°C, for the evaporation of H2SO4 solutions. The frame of this plate is inert to acids and constitutes a thermal insulation for protecting the surface of the bench. 350°C hot plate installed in an acid attack-resistant fume hood and bench made of 100% Polypropylene.
To use the DIHEN, an adapter is required so that the DIHEN can replace the injector and injector support adapter in a typical demountable torch. These adapters are available for most ICPMS instruments, as well as for many ICP instruments.
Adapter for DIHEN Nebulizer for Vista, 7x0, 8x0, Bruker, Analytik-Jena
Leybold Roughing Pump Oil, 1 Gallon.
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
PFA-Sapphire Upgrade Kit for Thermo X-Series ICPMS includes:
(1) PFA-ST Nebulizer
(1) PFA Spray Chamber
(1) PFA PureCap Endcap with additional gas port
(1) 1.8mm Sapphire Injector
(1) Platinum Shield
(1) Quartz Torch
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
To use the DIHEN, an adapter is required so that the DIHEN can replace the injector and injector support adapter in a typical demountable torch. These adapters are available for most ICPMS instruments, as well as for many ICP instruments.
Adapter for DIHEN Nebulizer for PQ Excell, X-Series
PFA-Platinum Upgrade Kit for Thermo X-Series ICPMS includes:
(2) PFA-100 MicroFlow nebulizers
(1) PFA Spray Chamber
(1) PFA PureCap Endcap with additional gas port
(1) Platinum Injector
(1) Platinum Shield
(1) Quartz Torch
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Meinhard GP General Purpose Mechanical Pump Oil is premium mechanical vacuum pump oil for the ultimate performance of your Varian Rotary Vane pumps. Meinhard GP Oil is specially prepared to meet the rotary vane exclusive specifications. We recommend that you change your vacuum pump oil at least every 3 months to prolong the life of your vacuum pump.
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
GAST Vacuum Pump Oil, 1 Gallon.
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Forevacuum Pump Oil – PFPE / 420, 1 kg (0.5 liter) Fomblin Y06-6 - (OEM 1319310)
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Inland geminYe 06 PFPE inert fluid. Drop in replacement to LVO 420 product, 1 kg (0.5 liter) - (OEM LVO 420)
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Pre-cleaned PFA Pure Tip pipette tips, 100μL Volume, in quantities of 10 or 96
(ES-7000-0101 & ES-7000-0111)
Please select your quantity below.
By using Racks on the hotplate, the container can be heated evenly from the bottom to the top.
They are manufactured to the dimensions of your vessel.
Adapted to your disposable or reusable bottles (Made of the same material and with same protection against corrosion).
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Cu skimmer cone, Cu base for Agilent 7700s
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $362.00 each |
Purchase 3+: | $326.00 each |
Discounts will be applied in the Shopping Cart
Inland geminYe LC80 PFPE inert fluid, 1 kilogram (Fomblin LC80 replacement)
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Ni Micro-Skimmer Cone for VG ExCell, VG PQ, VG PQ1, VG PQ2, VG PQ3, VG Axiom and VG all X.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $250.00 each |
Purchase 3+: | $225.00 each |
Discounts will be applied in the Shopping Cart
Pre-cleaned PFA Pure Tip pipette tips, 1000μL Volume, in quantities of 10 and 60
(ES-7000-1001 & ES-7000-1011)
Please select quantity below.
Santovac 5P Ultra diff. pump oil, 100mL
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
By using Racks on the hotplate, the container can be heated evenly from the bottom to the top.
They are manufactured to the dimensions of your vessel.
Adapted to your disposable or reusable bottles (Made of the same material and with same protection against corrosion).
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Ni Skimmer Cone for Finnigan Element I, Finnigan Element II and Finnigan Neptune.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $200.00 each |
Purchase 3+: | $175.00 each |
Discounts will be applied in the Shopping Cart
Al Skimmer Cone for Finnigan Element I, Finnigan Element II and Finnigan Neptune.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $175.00 each |
Purchase 3+: | $150.00 each |
Discounts will be applied in the Shopping Cart
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Ni skimmer cone , Ni base for Agilent T-Mode
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $362.00 each |
Purchase 3+: | $326.00 each |
Discounts will be applied in the Shopping Cart
Ni skimmer cone, Ni base for PerkinElmer Elan 5000
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $350.00 each |
Purchase 3+: | $320.00 each |
Discounts will be applied in the Shopping Cart
Ni skimmer cone, Ni base for Agilent 7500ce & 7500 cx
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $362.00 each |
Purchase 3+: | $326.00 each |
Discounts will be applied in the Shopping Cart
Ni skimmer cone, Ni base for PerkinElmer Elan 6000, Elan 6100, Elan 9000, Elan DRC-e, Elan DRC II and Elan DRC Plus
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $276.00 each |
Purchase 3+: | $248.00 each |
Discounts will be applied in the Shopping Cart
Ni Skimmer Cone, Nicone TM for VG ExCell, VG Xi and VG all X.
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $200.00 each |
Purchase 3+: | $175.00 each |
Discounts will be applied in the Shopping Cart
Ni skimmer cone , Ni base for Agilent 7500c & 7500c/s
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $362.00 each |
Purchase 3+: | $326.00 each |
Discounts will be applied in the Shopping Cart
PFA-coated Stainless steel transport rack (inert to acids)
The TransRack is an ideal accessory for digestion and evaporation apparatus.
Ni skimmer cone , Ni base for Agilent 4500, & 7500a, 7500i & 7500s
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $395.00 each |
Purchase 3+: | $360.00 each |
Discounts will be applied in the Shopping Cart
Polycarbonate transport rack
The TransRack is an ideal accessory for digestion and evaporation apparatus.
Ni skimmer cone , Ni base for Agilent 7700s
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $362.00 each |
Purchase 3+: | $326.00 each |
Discounts will be applied in the Shopping Cart
Ni skimmer cone , Ni base for Agilent 7700x/e & 8800
Quantity Discount Pricing | |
---|---|
Purchase 1-2: | $362.00 each |
Purchase 3+: | $326.00 each |
Discounts will be applied in the Shopping Cart
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Due to its special graphite construction, EasyDigest® procures an optimal even temperature throughout each sample. The temperature is stable and accurately controlled at +/- 2°. The maximum operating temperature, 250°C, is generally sufficient for the mineralization, concentration and evaporation operations of most of the mineral acids used: HCl, HNO3, HBr, HF, HCLO4.
Due to its special graphite construction, EasyDigest® procures an optimal even temperature throughout each sample. The temperature is stable and accurately controlled at +/- 2°. The maximum operating temperature, 250°C, is generally sufficient for the mineralization, concentration and evaporation operations of most of the mineral acids used: HCl, HNO3, HBr, HF, HCLO4.
Due to its special graphite construction, EasyDigest® procures an optimal even temperature throughout each sample. The temperature is stable and accurately controlled at +/- 2°. The maximum operating temperature, 250°C, is generally sufficient for the mineralization, concentration and evaporation operations of most of the mineral acids used: HCl, HNO3, HBr, HF, HCLO4.
Elbow stand:
The “Elbow Stand” accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.
It can be used in the following cases:
– To safely carry samples between the device and the fume hood,
– To let stand the elbows, before or after an experiment.
Coolant-Chiller Mix Non Glycol. Case of five half gallon bottles. Non-glycol coolant, which is made up of five half gallon bottles of distilled water and includes an additive to control black algae and other resistant strains.
Additional shipping charges may apply. Meinhard will contact you after your purchase is finalized.
Long Transfer Tube, Chamber to Torch, w/Ball Joints
Removed per Brian 3-2-2011
With this device a cleaning solution can be pumped manually in reverse, through both the sample and gas passages. Favorite cleaning solutions are - Sigma-Aldrich RBS-25 diluted about 20x, Deconex similarly diluted; - or - either of these, but with the addition of 10% methanol. When the wet-cleaning process is finished, rinse with DI water and flush dry with compressed air or inert gas.
The diagram below shows the 3 main types of blockages that can occur in pneumatic concentric nebulizers. Click here for cleaning guidelines.
#1 - Deposits at this point are typically composed of salts coming out of solution, such deposits can usually be removed by repeated rinsing of a concentric nebulizer with an appropriate solvent.
#2 - This sort of obstruction is the worst type, capable of breaking the tip of a glass capillary, if the deposit is insoluble, the only sure way to remove it is with a PEARL cleaner.
#3 - Deposits inside the capillary may can go unnoticed for quite a while, particularly if the sample is pumped, paper and textile fibers are often at fault.
Quartz Torch, ICP AX, w/Right Angle Socket
Removed per Brian 3/2/2011