Evaporate

The evaporation of the reagent to be eliminated or purified is held to a constant, uniform, and controlled temperature. This temperature is slightly under the boiling point. The isolated vapors from the atmosphere are condensed, canalized and stored in the coldest part with no way back possible to the solution to be evaporated. The EvapoClean® allows partial or complete evaporation of solutions at a constant and controlled temperature without any loss of elements and without contamination of the atmosphere. It makes the detection of traces and ultra-traces easier by different method of analysis. Contact us direct for customized options.

EvapoClean® Flyer Vessel Kit Flyer EvapoClean Accessories Flyer

 

EvapoClean

EvapoClean allows acid or organic solutions to be evaporated, concentrated, and purified in a closed setting, free from any exchange with the laboratory’s atmosphere. It makes the detection of traces and ultra-traces easier by different method of analysis.

Accessories

Available in 3 sizes, the Vessel Kits include the highest quality PTFE elbow, PFA vials, PFA closures for ultra-purity. The Elbow Stand accessory has been designed to carry elbows and beakers after the evaporation of acids or after the acid purification process.

Temperature Regulators

Temperature regulators are designed to control the devices reliably and safely. Two brands of temperature controllers have been selected: Fuji and Eurotherm. Designed with ultimate protection in mind with multiple alarms to guarantee maximum safety.

 


EvapoClean 3 x 25 mL

Part No.: EV-3.25mL

Three side positions for 25mL vessels. Maximum temperature 250°C.
Required: 110V temperature regulator, and vessel kit sold separately.


EvapoClean 6 x 25ml

Part No.: EV-6.25mL

Six side positions for 25mL vessels. Maximum temperature 200°C (with a 230V regulator) or max 150°C (with a 110V regulator).
Regulator and vessel kit sold separately.


EvapoClean 12 x 25ml

Part No.: EV-12.25mL

Twelve side positions for 25mL vessels. Maximum temperature 250°C.
Required: 110V temperature regulator sold separately.


EvapoClean 3 x 125ml

Part No.: EV-3.125mL

Three side positions for 125mL vessels. Maximum temperature 250°C.
Required: 110V temperature regulator and vessel kit sold separately.


EvapoClean 6 x 125ml

Part No.: EV-6.125mL

Six side positions for 125mL vessels. Maximum temperature 250°C (with a 230V regulator) or max 150°C (with a 110V regulator).
Regulators and vessel kit sold separately.


EvapoClean 12 x 125ml

Part No.: EV-12.125mL

Twelve side positions for 125mL vessels. Maximum temperature 180°C with a 230V regulator only.
Regulator and vessel kit sold separately.


EvapoClean 3 x 500mL

Part No.: EV-3.500mL

Three side positions for 500mL vessels. Maximum temperature 250°C.
Required: 230V temperature regulator and vessel kit sold separately.


Temperature Regulators - 110V

Part No.: REG-1V

Ultimate protection against unintended start, non-programmed temperature changes, short circuit, and overcurrent fuses. North American version.

Available options:

  • Non-programmable with timer (#RNP-1V-WT)
  • Programmable (#RP-1V)

Temperature Regulators - 208-240V

Part No.: REG-2V

Ultimate protection against unintended start, non-programmed temperature changes, short circuit, and overcurrent fuses. North American version.

Available options:

  • Non-programmable with timer (#REG-RNP-2V)
  • Programmable (#REG-RP-2V)

Vessel Kit - 25 ML

Part No.: Kit-Vessel-25ML

One kit includes the highest quality PTFE elbow (Qty 1) 25 mL PFA vials (qty 2) PFA closures (Qty 2) and laser marking.


Vessel Kit - 125ML - WV

Part No.: Kit-Vessel-125ML

One kit includes the highest quality PTFE elbow (Qty 1) 125 mL PFA vials with vent (qty 2) PFA closures (Qty 2) and laser marking.


Vessel Kit - 500 ML - WV

Part No.: Kit-Vessel-500ML-WV

One kit includes the highest quality PTFE elbow with vent (Qty 1) 500 mL PFA vials (qty 2) PFA closures (Qty 2) and laser marking.


Stand for Elbows - 3 X 500 mL

Part No.: ELBOW-STAND-3x500mL

Three position stand to hold 500mL vessels in any stage of the process.


Cleaning Kit - 25 mL

Part No.: EV-CleaningKit-25mL

The Cleaning Kit allows you to clean and decontaminate the vessel(s) used with your EvapoClean. Kit includes Three CleanClever No. 7 sleeves and three PFA 30mL vials.


Cleaning Kit - 125 mL

Part No.: EV-CleaningKit-125mL

The Cleaning Kit allows you to clean and decontaminate the vessel(s) used with your EvapoClean. Kit includes Three CleanClever No. 6 sleeves and three PFA 90mL jars.


Cleaning Kit - 500 mL

Part No.: EV-CleaningKit-500mL

The Cleaning Kit allows you to clean and decontaminate the vessel(s) used with your EvapoClean. Kit includes Three CleanClever No. 25 sleeves and three PFA 90mL jars.